Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Gabriel, CA
Gate installation in San Gabriel usually means replacing a mid-century wood or wrought iron gate that is sagging, rusting, or binding after decades in the Valley’s dry heat and seasonal rains. Most homes here are 1940s to 1970s bungalows and ranch houses, so the original gate is often hung on aging concrete footings or brick pillars that have shifted with the clay soil. We handle everything from a new pedestrian gate on a Mission District bungalow to a full automatic driveway gate on a newer property. Call (855) 679-6795 for a free on-site estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why San Gabriel Homes Are Different
San Gabriel gate work follows the age of the housing. The 91775 and 91776 ZIPs hold a large stock of pre-1980 single-story bungalows and ranch homes, and those properties often still have their original wrought iron pedestrian gates or wood driveway gates. Wood that has survived 50 or 60 years of hot, dry summers and Santa Ana winds tends to warp and pull at the hinges. Wrought iron rusts where the finish wore thin decades ago. The posts under both are the bigger issue: the Valley’s clay soil swells and contracts with seasonal moisture, and even a few inches of movement throws a gate out of plumb.
Earthquakes are the other San Gabriel variable. This is earthquake country. After even a minor seismic event, we get calls about gates that suddenly drag, latch through nothing, or lean against the pillar. In the older tracts near the Mission District, many driveway gates are hung on brick or cinder block pillars. Those pillars crack and lean after quakes or root heave from mature trees, and unless the pillar footing is re-set, any new gate will fail in the same spot. The repair has to start below the hinge.
The rainy season, December through March, brings the last common pattern: wood swells, footings erode at the surface, and gates that worked in October stick in January. None of this is exotic. It is predictable, and it is why a San Gabriel gate job usually involves more than swapping hardware.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main San Gabriel Services
Most San Gabriel homeowners call us for one of two things: a gate that no longer opens or closes reliably, or an electric operator that has stopped responding. Both are covered in depth on their own pages.
Gate Repair in San Gabriel
Mechanical gate repair in San Gabriel typically means hinge failure, sagging wood, a latch that no longer lines up, or a post that has shifted out of plumb. The clay soil under older lots moves with the seasons, and gates that have been fine for years can suddenly start dragging. After a minor earthquake, alignment and post anchorage issues are even more common. We repair the gate and the footing issue behind it, because fixing only the hinge on a leaning post means the next callback is already scheduled. For the full breakdown of repair work, see Gate Repair in San Gabriel.
Electric Gate Repair in San Gabriel
Electric gate repair in San Gabriel covers operators, control boards, loop detectors, safety sensors, keypads, and remote systems. The dry heat is hard on capacitors and control boards, and the occasional ants that colonize a warm operator housing are a surprising part of Valley work. FAAC, BFT, Linear, and Viking systems are all familiar territory for our technicians, so the fault is diagnosed from the symptoms rather than from a manual or a guess. For wiring, motor, and automation issues, see Electric Gate Repair in San Gabriel.
Gate Installation in San Gabriel
Gate installation in San Gabriel usually means replacing a gate that has outlived its posts. The 1940s through 1970s ranch homes and bungalows in the 91775 and 91776 ZIPs often still carry their original wood driveway gates or wrought iron pedestrian gates, and the hardware, the wood, and the footings have all aged together. A new gate installed on those old footings fails early, so we begin with the post and pillar condition and then build or hang the gate to match the house. For details on full Gate Installation, keep reading.
Automatic Gate Installation
Signs you need it
A manually opened driveway gate that has become a daily hassle, or a gate you want to open from the car or phone.
What it costs in San Gabriel
Typical automatic gate installation in San Gabriel runs $4,500 to $9,800 depending on gate size, operator type, and the condition of the existing posts.
How we do it
We set or reinforce the posts, install the gate panel and operator, wire the control board and safety edges, and program the remotes and keypad.
Driveway Gate Installation
Signs you need it
A wood gate that sags at the latch, a wrought iron gate rusted through at the hinges, or a post that leans visibly after the ground shifts.
What it costs in San Gabriel
Typical driveway gate installation in San Gabriel runs $3,800 to $8,500 for a new gate and hardware, with automation priced separately.
How we do it
We remove the old gate, inspect the footings and pillars, set or brace posts as needed, and hang the new gate with hardware sized for its weight.
Sliding Gate Installation
Signs you need it
You prefer a gate that runs parallel to the fence line instead of swinging into the driveway, often because the driveway slopes or space is tight.
What it costs in San Gabriel
Typical sliding gate installation in San Gabriel runs $5,000 to $10,500 depending on track length, gate weight, and whether an operator is added.
How we do it
We set the track and posts to the gate’s full travel, align the rollers to carry the weight evenly, and install the gate panel and any automation.
What Gate Installation Costs in San Gabriel
| Item | Typical range in San Gabriel |
|---|---|
| Pedestrian gate installation | $1,500 – $3,500 |
| Driveway gate installation | $3,800 – $8,500 |
| Automatic gate installation | $4,500 – $9,800 |
Does a new gate include the posts and footings?
It depends on the site. We price the job after checking the existing footings and pillars. If the posts are sound, we work with them. If they have shifted or cracked, re-setting them is part of the written estimate, not a surprise later.
How long does a gate installation take in San Gabriel?
Most single-gate installations in San Gabriel are finished in one visit. If posts need new concrete footings, the job may need a return trip for the concrete to cure before the gate is hung, which we schedule before we start.
Brands We Service in San Gabriel
We work on the brand you already have. FAAC, BFT, Linear, and Viking are the operators we see most on San Gabriel properties, and our technicians diagnose their faults from the symptoms, not from a manual. For parts we do not carry on the truck, our local supply chain keeps most San Gabriel jobs moving without a long wait. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Gabriel, CA
| Service | Typical range in San Gabriel |
|---|---|
| Gate repair (minor) | $225 – $500 |
| Gate repair (major) | $500 – $1,500 |
| Electric gate operator repair | $400 – $1,300 |
| Pedestrian gate installation | $1,500 – $3,500 |
| Driveway gate installation | $3,800 – $8,500 |
| Sliding gate installation | $5,000 – $10,500 |
| Automatic gate installation | $4,500 – $9,800 |
| Post and footing reset | $500 – $2,200 |
In San Gabriel, the two things that push a gate job up are the post condition and the automation. A leaning brick pillar near the Mission District or a gate post with eroded concrete footings has to be addressed before any new gate goes on, and that adds labor. We quote the full price before any work starts, from the first hinge to the last safety edge, so the number on the written estimate is the number you approve.
Neighborhoods We Serve in San Gabriel
We work all over San Gabriel, from the older tracts near the Mission District to the ranch home streets south of Las Tunas Drive and the newer pockets near the 91778 ZIP. Driveway gates, pedestrian gates, and automatic systems all fall under the same service call.
- Mission District area
- North San Gabriel
- San Gabriel Village
- South of Las Tunas Drive
- Country Club area
Most San Gabriel locations are within a short drive of our Baldwin Park base, so a typical response runs under an hour once a technician is dispatched.
Service Area – Cities Near San Gabriel
We also cover the neighboring cities that share the same Valley conditions and gate hardware. Homeowners in Temple City, CA call us for the same sagging wood gates and aging operators. In Monrovia, CA, the older residential lots bring similar post and footing work. Our home base in Baldwin Park, CA keeps dispatch close, and West Puente Valley, CA rounds out the nearby coverage area.
Serving San Gabriel, CA – Our Local Coverage Area
We serve San Gabriel and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Gabriel
Most San Gabriel neighborhoods are a short drive from our Baldwin Park base, so a technician can usually be on site within an hour of dispatch. Call (855) 679-6795. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Permit requirements vary by project and property. A like-for-like gate replacement rarely triggers one, but new automation or a large driveway gate can. Ask San Gabriel’s building department what your specific job needs, and we will work with whatever they require.
Yes. Many San Gabriel HOAs have rules about gate height, material, and color, especially in the older tracts where the original look matters. We install to the HOA’s written spec and can adjust the materials and finish before the estimate is finalized.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What San Gabriel Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Raj Sharma"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Marco Reyes"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Ernesto Garcia